Rails 3 od zera ... (część 1.)
Framework Ruby on Rails doczekał się w końcu wersji 3, czas więc na pierwszą "szpachle" ;)
Pierwszą niezbędną wg mnie rzeczą jaką będziemy potrzebować jest RVM (Ruby Version Manager), który znacznie ułatwia zarówno eksperymenty, testowanie jak codzienną pracę. RVM pozwala na instalacje kilku wersji interpretera Ruby oraz sprawne i szybkie przełaczanie między nimi. Największą jego zaletą jest również fakt instalacji interpreterów w katalogu użytkownika, eliminując konieczność posiadania uprawnień do instalacji oprogramowania i używania polecenia sudo
Proponuje zainstalować go bezpośrednio ze źródeł, odcinając tym samym pępowine od systemowej instalacji języka Ruby:
Last login: Fri Feb 26 18:29:46 on ttys004
mkdir -p ~/.rvm/src/ && cd ~/.rvm/src && rm -rf ./rvm/ && git clone git://github.com/wayneeseguin/rvm.git && cd rvm && ./install
Następnie dodajemy niezbędno linijkę do pliku ~/.profile:
if [[ -s /Users/andrzejsliwa/.rvm/scripts/rvm ]] ; then source /Users/andrzejsliwa/.rvm/scripts/rvm ; fi
W tym momencie musimy uruchomić nową sesję terminala tak by dodane przez nas zmiany odniosły skutek. Poprawną instalację powinnień potwierdzić taki oto rezultat polecenia rvm list:
mac:~ andrzejsliwa$ rvm list
rvm Rubies
System Ruby
system [ x86_64 i386 ppc ]
mac:~ andrzejsliwa$ rvm install 1.9.1
Installing Ruby from source to: /Users/andrzejsliwa/.rvm/rubies/ruby-1.9.1-p378
Downloading ruby-1.9.1-p378, this may take a while depending on your connection...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 8862k 100 8862k 0 0 100k 0 0:01:28 0:01:28 --:--:-- 121k
Extracting ruby-1.9.1-p378 ...
Configuring ruby-1.9.1-p378, this may take a while depending on your cpu(s)...
Compiling ruby-1.9.1-p378, this may take a while, depending on your cpu(s)...
Installing ruby-1.9.1-p378
Installation of ruby-1.9.1-p378 is complete.
Updating rubygems for ruby-1.9.1-p378
Installing gems for ruby-1.9.1-p378.
Installing rake
Installation of gems for ruby-1.9.1-p378 is complete.
Następnie instalujemy interpreter Rubego 1.9.1
mac:~ andrzejsliwa$ rvm 1.9.1 --default
Poprawność instalacji możemy zweryfikować w następujący sposób:
mac:~ andrzejsliwa$ which ruby
/Users/andrzejsliwa/.rvm/rubies/ruby-1.9.1-p378/bin/ruby
mac:~ andrzejsliwa$ which gem
/Users/andrzejsliwa/.rvm/rubies/ruby-1.9.1-p378/bin/gem
mac:~ andrzejsliwa$ ruby -v
ruby 1.9.1p378 (2010-01-10 revision 26273) [i386-darwin10.2.0]
mac:~ andrzejsliwa$ gem -v
1.3.6
Chciałbym wyraźnie w tym miejscu przypomnieć że począwszy od wersji 1.3.6 RubyGems, domyślnym źródłem gemów jest strona http://rubygems.org/ (dawny gemcutter.org)
Jedną z ciekawych funkcji RVM jest możliwość definiowania różnych nazwanych zbiorów gemów które można przełączać w ramach jednego interpretera. (domyślnym zbiorem gemów jest %global)
Tworzymy zbiór gemów odpowiedzialny za testowanie Rails w wersji 3.0 pre:
mac:~ andrzejsliwa$ rvm gemset create rails3pre
Gemset 'rails3pre' created.
Następnie wybieramy go jako bierzący:
mac:~ andrzejsliwa$ rvm 1.9.1%rails3pre
mac:~ andrzejsliwa$ rvm list
rvm Rubies
=> ruby-1.9.1-p378 [ x86_64 ]
Default Ruby (for new shells)
ruby-1.9.1-p378 [ x86_64 ]
System Ruby
system [ x86_64 i386 ppc ]
Następnie instalujemy Ruby on Rails
mac:~ andrzejsliwa$ gem install rails --pre
Due to a rubygems bug, you must uninstall older versions of the bundler gem for 0.9 to work.
If you still need bundler 0.8, install the 'bundler08' gem.
Successfully installed i18n-0.3.5
Successfully installed tzinfo-0.3.16
Successfully installed builder-2.1.2
Successfully installed memcache-client-1.7.8
Successfully installed activesupport-3.0.0.beta
Successfully installed activemodel-3.0.0.beta
Successfully installed rack-1.1.0
Successfully installed rack-test-0.5.3
Successfully installed rack-mount-0.4.7
Successfully installed abstract-1.0.0
Successfully installed erubis-2.6.5
Successfully installed actionpack-3.0.0.beta
Successfully installed arel-0.2.1
Successfully installed activerecord-3.0.0.beta
Successfully installed activeresource-3.0.0.beta
Successfully installed mime-types-1.16
Successfully installed mail-2.1.3
Successfully installed text-hyphen-1.0.0
Successfully installed text-format-1.0.0
Successfully installed actionmailer-3.0.0.beta
Successfully installed thor-0.13.4
Successfully installed railties-3.0.0.beta
Successfully installed bundler-0.9.9
Successfully installed rails-3.0.0.beta
24 gems installed
Installing ri documentation for i18n-0.3.5...
Installing ri documentation for tzinfo-0.3.16...
Installing ri documentation for builder-2.1.2...
Installing ri documentation for memcache-client-1.7.8...
Installing ri documentation for activesupport-3.0.0.beta...
Installing ri documentation for activemodel-3.0.0.beta...
Installing ri documentation for rack-1.1.0...
Installing ri documentation for rack-test-0.5.3...
Installing ri documentation for rack-mount-0.4.7...
Installing ri documentation for abstract-1.0.0...
Installing ri documentation for erubis-2.6.5...
Installing ri documentation for actionpack-3.0.0.beta...
Installing ri documentation for arel-0.2.1...
Installing ri documentation for activerecord-3.0.0.beta...
Installing ri documentation for activeresource-3.0.0.beta...
Installing ri documentation for mime-types-1.16...
Installing ri documentation for mail-2.1.3...
Installing ri documentation for text-hyphen-1.0.0...
Installing ri documentation for text-format-1.0.0...
Installing ri documentation for actionmailer-3.0.0.beta...
Installing ri documentation for thor-0.13.4...
Installing ri documentation for railties-3.0.0.beta...
Installing ri documentation for bundler-0.9.9...
Installing ri documentation for rails-3.0.0.beta...
Installing RDoc documentation for i18n-0.3.5...
Installing RDoc documentation for tzinfo-0.3.16...
Installing RDoc documentation for builder-2.1.2...
Installing RDoc documentation for memcache-client-1.7.8...
Installing RDoc documentation for activesupport-3.0.0.beta...
Installing RDoc documentation for activemodel-3.0.0.beta...
Installing RDoc documentation for rack-1.1.0...
Installing RDoc documentation for rack-test-0.5.3...
Installing RDoc documentation for rack-mount-0.4.7...
Installing RDoc documentation for abstract-1.0.0...
Installing RDoc documentation for erubis-2.6.5...
Installing RDoc documentation for actionpack-3.0.0.beta...
Installing RDoc documentation for arel-0.2.1...
Installing RDoc documentation for activerecord-3.0.0.beta...
Installing RDoc documentation for activeresource-3.0.0.beta...
Installing RDoc documentation for mime-types-1.16...
Installing RDoc documentation for mail-2.1.3...
Installing RDoc documentation for text-hyphen-1.0.0...
Installing RDoc documentation for text-format-1.0.0...
Installing RDoc documentation for actionmailer-3.0.0.beta...
Installing RDoc documentation for thor-0.13.4...
Installing RDoc documentation for railties-3.0.0.beta...
Installing RDoc documentation for bundler-0.9.9...
Installing RDoc documentation for rails-3.0.0.beta...
Aby upewnić się że pracujemy na naszym zbiorze gemów przełączamy się na domyślny i weryfikujemy że nie ma zainstalowanych gemów związanych z rails 3
mac:~ andrzejsliwa$ rvm 1.9.1
mac:~ andrzejsliwa$ gem list
*** LOCAL GEMS ***
rake (0.8.7)
rubygems-update (1.3.6)
Następnie wracamy ponownie do naszego zbioru rails3pre:
mac:~ andrzejsliwa$ rvm 1.9.1%rails3pre
mac:~ andrzejsliwa$ gem list
*** LOCAL GEMS ***
abstract (1.0.0)
actionmailer (3.0.0.beta)
actionpack (3.0.0.beta)
activemodel (3.0.0.beta)
activerecord (3.0.0.beta)
activeresource (3.0.0.beta)
activesupport (3.0.0.beta)
arel (0.2.1)
builder (2.1.2)
bundler (0.9.9)
erubis (2.6.5)
i18n (0.3.5)
mail (2.1.3)
memcache-client (1.7.8)
mime-types (1.16)
rack (1.1.0)
rack-mount (0.4.7)
rack-test (0.5.3)
rails (3.0.0.beta)
railties (3.0.0.beta)
rake (0.8.7)
rubygems-update (1.3.6)
text-format (1.0.0)
text-hyphen (1.0.0)
thor (0.13.4)
tzinfo (0.3.16)
Kolejnym krokiem jest stworzenie naszej przykładowej aplikacji
mac:work andrzejsliwa$ rails testapp -d postgresql
create
create README
create .gitignore
create Rakefile
create config.ru
create Gemfile
create app
create app/controllers/application_controller.rb
create app/helpers/application_helper.rb
create app/models
create app/views/layouts
create config
create config/routes.rb
create config/application.rb
create config/environment.rb
create config/environments
create config/environments/development.rb
create config/environments/production.rb
create config/environments/test.rb
create config/initializers
create config/initializers/backtrace_silencers.rb
create config/initializers/cookie_verification_secret.rb
create config/initializers/inflections.rb
create config/initializers/mime_types.rb
create config/initializers/session_store.rb
create config/locales
create config/locales/en.yml
create config/boot.rb
create config/database.yml
create db
create db/seeds.rb
create doc
create doc/README_FOR_APP
create lib
create lib/tasks
create lib/tasks/.gitkeep
create log
create log/server.log
create log/production.log
create log/development.log
create log/test.log
create public
create public/404.html
create public/422.html
create public/500.html
create public/favicon.ico
create public/index.html
create public/robots.txt
create public/images
create public/images/rails.png
create public/stylesheets
create public/stylesheets/.gitkeep
create public/javascripts
create public/javascripts/application.js
create public/javascripts/controls.js
create public/javascripts/dragdrop.js
create public/javascripts/effects.js
create public/javascripts/prototype.js
create public/javascripts/rails.js
create script
create script/rails
create test
create test/performance/browsing_test.rb
create test/test_helper.rb
create test/fixtures
create test/functional
create test/integration
create test/unit
create tmp
create tmp/sessions
create tmp/sockets
create tmp/cache
create tmp/pids
create vendor/plugins
create vendor/plugins/.gitkeep
mac:work andrzejsliwa$ cd testapp/
Instalujemy zależności za pomocą narzędzia bundler:
mac:testapp andrzejsliwa$ bundle -h
Tasks:
bundle check # Checks if the dependencies listed in Gemfile are satisfied by currently installed gems
bundle exec # Run the command in context of the bundle
bundle help [TASK] # Describe available tasks or one specific task
bundle init # Generates a Gemfile into the current working directory
bundle install # Install the current environment to the system
bundle lock # Locks the bundle to the current set of dependencies, including all child dependencies.
bundle package # Locks and then caches all of the gems into vendor/cache
bundle show # Shows all gems that are part of the bundle.
bundle unlock # Unlock the bundle. This allows gem versions to be changed
bundle version # Prints the bundler's version information
mac:testapp andrzejsliwa$ bundle install
Fetching source index from http://gemcutter.org/
Resolving dependencies
Installing abstract (1.0.0) from system gems
Installing actionmailer (3.0.0.beta) from system gems
Installing actionpack (3.0.0.beta) from system gems
Installing activemodel (3.0.0.beta) from system gems
Installing activerecord (3.0.0.beta) from system gems
Installing activeresource (3.0.0.beta) from system gems
Installing activesupport (3.0.0.beta) from system gems
Installing arel (0.2.1) from system gems
Installing builder (2.1.2) from system gems
Installing bundler (0.9.9) from system gems
Installing erubis (2.6.5) from system gems
Installing i18n (0.3.5) from system gems
Installing mail (2.1.3) from system gems
Installing memcache-client (1.7.8) from system gems
Installing mime-types (1.16) from system gems
Installing pg (0.8.0) from rubygems repository at http://gemcutter.org/ with native extensions
Installing rack (1.1.0) from system gems
Installing rack-mount (0.4.7) from system gems
Installing rack-test (0.5.3) from system gems
Installing rails (3.0.0.beta) from system gems
Installing railties (3.0.0.beta) from system gems
Installing rake (0.8.7) from system gems
Installing text-format (1.0.0) from system gems
Installing text-hyphen (1.0.0) from system gems
Installing thor (0.13.4) from system gems
Installing tzinfo (0.3.16) from system gems
Your bundle is complete!
W tym momencie możemy zmodyfikować plik .gitignore taka aby wyglądał następująco:
.bundle
.DS_Store
db/*.sqlite3
log/*.log
tmp/**/*
config/database.yml
Następnie modyfikujemy plik config/database.yml
# PostgreSQL. Versions 7.4 and 8.x are supported.
#
# Install the ruby-postgres driver:
# gem install ruby-postgres
# On Mac OS X:
# gem install ruby-postgres -- --include=/usr/local/pgsql
# On Windows:
# gem install ruby-postgres
# Choose the win32 build.
# Install PostgreSQL and put its /bin directory on your path.
base: &base
adapter: postgresql
encoding: unicode
pool: 5
username: postgres
password:
development:
database: testapp_development
<<: *base
# Connect on a TCP socket. Omitted by default since the client uses a
# domain socket that doesn't need configuration. Windows does not have
# domain sockets, so uncomment these lines.
#host: localhost
#port: 5432
# Schema search path. The server defaults to $user,public
#schema_search_path: myapp,sharedapp,public
# Minimum log levels, in increasing order:
# debug5, debug4, debug3, debug2, debug1,
# log, notice, warning, error, fatal, and panic
# The server defaults to notice.
#min_messages: warning
# Warning: The database defined as "test" will be erased and
# re-generated from your development database when you run "rake".
# Do not set this db to the same as development or production.
test:
database: testapp_test
<<: *base
production:
database: testapp_production
<<: *base
Kopiujemy plik jako przykładowy:
mac:testapp andrzejsliwa$ cp config/database.yml config/database.yml.example
Możemy w tym momencie również się rozejrzeć po aplikacji i zadaniach rake
mac:testapp andrzejsliwa$ rake -T
(in /Users/andrzejsliwa/work/testapp)
rake about # Explain the current environment
rake db:abort_if_pending_migrations # Raises an error if there are pending migrations
rake db:charset # Retrieves the charset for the current environment's database
rake db:collation # Retrieves the collation for the current environment's database
rake db:create # Create the database defined in config/database.yml for the current Rails.env - al...
rake db:create:all # Create all the local databases defined in config/database.yml
rake db:drop # Drops the database for the current Rails.env
rake db:drop:all # Drops all the local databases defined in config/database.yml
rake db:fixtures:identify # Search for a fixture given a LABEL or ID.
rake db:fixtures:load # Load fixtures into the current environment's database.
rake db:forward # Pushes the schema to the next version.
rake db:migrate # Migrate the database through scripts in db/migrate and update db/schema.rb by inv...
rake db:migrate:down # Runs the "down" for a given migration VERSION.
rake db:migrate:redo # Rollbacks the database one migration and re migrate up.
rake db:migrate:reset # Resets your database using your migrations for the current environment
rake db:migrate:up # Runs the "up" for a given migration VERSION.
rake db:reset # Drops and recreates the database from db/schema.rb for the current environment an...
rake db:rollback # Rolls the schema back to the previous version.
rake db:schema:dump # Create a db/schema.rb file that can be portably used against any DB supported by AR
rake db:schema:load # Load a schema.rb file into the database
rake db:seed # Load the seed data from db/seeds.rb
rake db:sessions:clear # Clear the sessions table
rake db:sessions:create # Creates a sessions migration for use with ActiveRecord::SessionStore
rake db:setup # Create the database, load the schema, and initialize with the seed data
rake db:structure:dump # Dump the database structure to a SQL file
rake db:test:clone # Recreate the test database from the current environment's database schema
rake db:test:clone_structure # Recreate the test databases from the development structure
rake db:test:load # Recreate the test database from the current schema.rb
rake db:test:prepare # Check for pending migrations and load the test schema
rake db:test:purge # Empty the test database
rake db:version # Retrieves the current schema version number
rake doc:app # Build the RDOC HTML Files
rake doc:clobber_app # Remove rdoc products
rake doc:clobber_plugins # Remove plugin documentation
rake doc:clobber_rails # Remove rdoc products
rake doc:guides # Generate Rails guides
rake doc:plugins # Generate documentation for all installed plugins
rake doc:rails # Build the RDOC HTML Files
rake doc:reapp # Force a rebuild of the RDOC files
rake doc:rerails # Force a rebuild of the RDOC files
rake log:clear # Truncates all *.log files in log/ to zero bytes
rake middleware # Prints out your Rack middleware stack
rake notes # Enumerate all annotations
rake notes:custom # Enumerate a custom annotation, specify with ANNOTATION=CUSTOM
rake notes:fixme # Enumerate all FIXME annotations
rake notes:optimize # Enumerate all OPTIMIZE annotations
rake notes:todo # Enumerate all TODO annotations
rake rails:freeze:edge # The freeze:edge command has been deprecated, specify the path setting in your app...
rake rails:freeze:gems # The rails:freeze:gems is deprecated, please use bundle install instead
rake rails:template # Applies the template supplied by LOCATION=/path/to/template
rake rails:unfreeze # The unfreeze command has been deprecated, please use bundler commands instead
rake rails:update # Update both configs, scripts and public/javascripts from Rails
rake rails:update:application_controller # Rename application.rb to application_controller.rb
rake rails:update:configs # Update config/boot.rb from your current rails install
rake rails:update:javascripts # Update Prototype javascripts from your current rails install
rake rails:update:scripts # Adds new scripts to the application script/ directory
rake routes # Print out all defined routes in match order, with names.
rake secret # Generate a crytographically secure secret key.
rake stats # Report code statistics (KLOCs, etc) from the application
rake test # Run all unit, functional and integration tests
rake test:benchmark # Run tests for {:benchmark=>"db:test:prepare"} / Benchmark the performance tests
rake test:functionals # Run tests for {:functionals=>"db:test:prepare"} / Run the functional tests in tes...
rake test:integration # Run tests for {:integration=>"db:test:prepare"} / Run the integration tests in te...
rake test:plugins # Run tests for {:plugins=>:environment} / Run the plugin tests in vendor/plugins/*...
rake test:profile # Run tests for {:profile=>"db:test:prepare"} / Profile the performance tests
rake test:recent # Run tests for {:recent=>"db:test:prepare"} / Test recent changes
rake test:uncommitted # Run tests for {:uncommitted=>"db:test:prepare"} / Test changes since last checkin...
rake test:units # Run tests for {:units=>"db:test:prepare"} / Run the unit tests in test/unit
rake time:zones:all # Displays names of all time zones recognized by the Rails TimeZone class, grouped ...
rake time:zones:local # Displays names of time zones recognized by the Rails TimeZone class with the same...
rake time:zones:us # Displays names of US time zones recognized by the Rails TimeZone class, grouped b...
rake tmp:cache:clear # Clears all files and directories in tmp/cache
rake tmp:clear # Clear session, cache, and socket files from tmp/
rake tmp:create # Creates tmp directories for sessions, cache, sockets, and pids
rake tmp:pids:clear # Clears all files in tmp/pids
rake tmp:sessions:clear # Clears all files in tmp/sessions
rake tmp:sockets:clear # Clears all files in tmp/sockets
W wersji 3.0 ulegl zmianie sposób wywoływania podstawowych poleceń, zastąpiono pojedyńcze skrypty poleceniem rails i odpowiednim parametrem (lub jego skrutem):
mac:testapp andrzejsliwa$ rails -h
Usage: rails COMMAND [ARGS]
The most common rails commands are:
generate Generate new code (short-cut alias: "g")
console Start the Rails console (short-cut alias: "c")
server Start the Rails server (short-cut alias: "s")
dbconsole Start a console for the database specified in config/database.yml
(short-cut alias: "db")
In addition to those, there are:
application Generate the Rails application code
destroy Undo code generated with "generate"
benchmarker See how fast a piece of code runs
profiler Get profile information from a piece of code
plugin Install a plugin
runner Run a piece of code in the application environment
All commands can be run with -h for more information.
Kolejnym krokiem przed uruchomieniem naszej przykladowej aplikacji jest stworzenie niezbędnych baz oraz uruchomienie serwera:
mac:testapp andrzejsliwa$ rake db:create:all
(in /Users/andrzejsliwa/work/testapp)
mac:testapp andrzejsliwa$ rails s
=> Booting WEBrick
=> Rails 3.0.0.beta application starting in development on http://0.0.0.0:3000
=> Call with -d to detach
=> Ctrl-C to shutdown server
[2010-02-26 19:37:50] INFO WEBrick 1.3.1
[2010-02-26 19:37:50] INFO ruby 1.9.1 (2010-01-10) [i386-darwin10.2.0]
[2010-02-26 19:37:50] INFO WEBrick::HTTPServer#start: pid=44009 port=3000
Teraz możemy użyć generatorów które zostały w wersji 3.0 w całości przebudowane (tym samym stając się nie kompatybilne z poprzednią wersją). Między innymi wprowadzono w nich uchwyty pozwalające na wymienne stosowanie np. frameworków testowania, widoku itp:
mac:testapp andrzejsliwa$ r g
Usage: rails generate GENERATOR [args] [options]
General options:
-h, [--help] # Print generators options and usage
-p, [--pretend] # Run but do not make any changes
-f, [--force] # Overwrite files that already exist
-s, [--skip] # Skip files that already exist
-q, [--quiet] # Supress status output
Please choose a generator below.
Rails:
controller
generator
helper
integration_test
mailer
metal
migration
model
model_subclass
observer
performance_test
plugin
resource
scaffold
scaffold_controller
session_migration
stylesheets
ActiveRecord:
active_record:migration
active_record:model
active_record:observer
active_record:session_migration
Erb:
erb:controller
erb:mailer
erb:scaffold
TestUnit:
test_unit:controller
test_unit:helper
test_unit:integration
test_unit:mailer
test_unit:model
test_unit:observer
test_unit:performance
test_unit:plugin
test_unit:scaffold
mac-2:testapp andrzejsliwa$ r g scaffold Post title:string content:text
invoke active_record
create db/migrate/20100226184313_create_posts.rb
create app/models/post.rb
invoke test_unit
create test/unit/post_test.rb
create test/fixtures/posts.yml
route resources :posts
invoke scaffold_controller
create app/controllers/posts_controller.rb
invoke erb
create app/views/posts
create app/views/posts/index.html.erb
create app/views/posts/edit.html.erb
create app/views/posts/show.html.erb
create app/views/posts/new.html.erb
create app/views/posts/_form.html.erb
create app/views/layouts/posts.html.erb
invoke test_unit
create test/functional/posts_controller_test.rb
invoke helper
create app/helpers/posts_helper.rb
invoke test_unit
create test/unit/helpers/posts_helper_test.rb
invoke stylesheets
create public/stylesheets/scaffold.css
Na tym etapie usuwamy zbędne pliki:
mac:testapp andrzejsliwa$ rm public/index.html
mac:testapp andrzejsliwa$ rm public/favicon.ico
Migrujemy bazę danych:
mac:testapp andrzejsliwa$ rake db:migrate
(in /Users/andrzejsliwa/work/testapp)
== CreatePosts: migrating ====================================================
-- create_table(:posts)
NOTICE: CREATE TABLE will create implicit sequence "posts_id_seq" for serial column "posts.id"
NOTICE: CREATE TABLE / PRIMARY KEY will create implicit index "posts_pkey" for table "posts"
-> 0.0073s
== CreatePosts: migrated (0.0074s) ===========================================
Oraz definiujemy routing:
Testapp::Application.routes.draw do |map|
resources :posts
# ...
root :to => "posts#index"
end
Tak przygotowaną aplikacje, po przetestowaniu możemy dodać do repozytorium gita:
mac:testapp andrzejsliwa$ git init
Initialized empty Git repository in /Users/andrzejsliwa/work/testapp/.git/
mac:testapp andrzejsliwa$ git add .
mac:testapp andrzejsliwa$ git status
# On branch master
#
# Initial commit
#
# Changes to be committed:
# (use "git rm --cached <file>..." to unstage)
#
# new file: .gitignore
# new file: Gemfile
# new file: README
# new file: Rakefile
# new file: app/controllers/application_controller.rb
# new file: app/controllers/posts_controller.rb
# new file: app/helpers/application_helper.rb
# new file: app/helpers/posts_helper.rb
# new file: app/models/post.rb
# new file: app/views/layouts/posts.html.erb
# new file: app/views/posts/_form.html.erb
# new file: app/views/posts/edit.html.erb
# new file: app/views/posts/index.html.erb
# new file: app/views/posts/new.html.erb
# new file: app/views/posts/show.html.erb
# new file: config.ru
# new file: config/application.rb
# new file: config/boot.rb
# new file: config/database.yml.example
# new file: config/environment.rb
# new file: config/environments/development.rb
# new file: config/environments/production.rb
# new file: config/environments/test.rb
# new file: config/initializers/backtrace_silencers.rb
# new file: config/initializers/cookie_verification_secret.rb
# new file: config/initializers/inflections.rb
# new file: config/initializers/mime_types.rb
# new file: config/initializers/session_store.rb
# new file: config/locales/en.yml
# new file: config/routes.rb
# new file: db/migrate/20100226184313_create_posts.rb
# new file: db/schema.rb
# new file: db/seeds.rb
# new file: doc/README_FOR_APP
# new file: lib/tasks/.gitkeep
# new file: public/404.html
# new file: public/422.html
# new file: public/500.html
# new file: public/images/rails.png
# new file: public/javascripts/application.js
# new file: public/javascripts/controls.js
# new file: public/javascripts/dragdrop.js
# new file: public/javascripts/effects.js
# new file: public/javascripts/prototype.js
# new file: public/javascripts/rails.js
# new file: public/robots.txt
# new file: public/stylesheets/.gitkeep
# new file: public/stylesheets/scaffold.css
# new file: script/rails
# new file: test/fixtures/posts.yml
# new file: test/functional/posts_controller_test.rb
# new file: test/performance/browsing_test.rb
# new file: test/test_helper.rb
# new file: test/unit/helpers/posts_helper_test.rb
# new file: test/unit/post_test.rb
# new file: vendor/plugins/.gitkeep
#
mac:testapp andrzejsliwa$ git commit -m "initial import"
[master (root-commit) 54399d1] initial import
53 files changed, 8540 insertions(+), 0 deletions(-)
create mode 100644 .gitignore
create mode 100644 Gemfile
create mode 100644 README
create mode 100644 Rakefile
create mode 100644 app/controllers/application_controller.rb
create mode 100644 app/controllers/posts_controller.rb
create mode 100644 app/helpers/application_helper.rb
create mode 100644 app/helpers/posts_helper.rb
create mode 100644 app/models/post.rb
create mode 100644 app/views/layouts/posts.html.erb
create mode 100644 app/views/posts/_form.html.erb
create mode 100644 app/views/posts/edit.html.erb
create mode 100644 app/views/posts/index.html.erb
create mode 100644 app/views/posts/new.html.erb
create mode 100644 app/views/posts/show.html.erb
create mode 100644 config.ru
create mode 100644 config/application.rb
create mode 100644 config/boot.rb
create mode 100644 config/database.yml.example
create mode 100644 config/environment.rb
create mode 100644 config/environments/development.rb
create mode 100644 config/environments/production.rb
create mode 100644 config/environments/test.rb
create mode 100644 config/initializers/backtrace_silencers.rb
create mode 100644 config/initializers/cookie_verification_secret.rb
create mode 100644 config/initializers/inflections.rb
create mode 100644 config/initializers/mime_types.rb
create mode 100644 config/initializers/session_store.rb
create mode 100644 config/locales/en.yml
create mode 100644 config/routes.rb
create mode 100644 db/migrate/20100226184313_create_posts.rb
create mode 100644 db/schema.rb
create mode 100644 db/seeds.rb
create mode 100644 doc/README_FOR_APP
create mode 100644 lib/tasks/.gitkeep
create mode 100644 public/404.html
create mode 100644 public/422.html
create mode 100644 public/500.html
create mode 100644 public/images/rails.png
create mode 100644 public/javascripts/application.js
create mode 100644 public/javascripts/controls.js
create mode 100644 public/javascripts/dragdrop.js
create mode 100644 public/javascripts/effects.js
create mode 100644 public/javascripts/prototype.js
create mode 100644 public/javascripts/rails.js
create mode 100644 public/robots.txt
create mode 100644 public/stylesheets/.gitkeep
create mode 100644 public/stylesheets/scaffold.css
create mode 100755 script/rails
create mode 100644 test/fixtures/posts.yml
create mode 100644 test/functional/posts_controller_test.rb
create mode 100644 test/performance/browsing_test.rb
create mode 100644 test/test_helper.rb
create mode 100644 test/unit/helpers/posts_helper_test.rb
create mode 100644 test/unit/post_test.rb
create mode 100644 vendor/plugins/.gitkeep
mac-2:testapp andrzejsliwa$ git remote add origin git@github.com:andrzejsliwa/testapp.git
mac-2:testapp andrzejsliwa$ git push origin master
Counting objects: 84, done.
Delta compression using up to 2 threads.
Compressing objects: 100% (68/68), done.
Writing objects: 100% (84/84), 81.08 KiB, done.
Total 84 (delta 2), reused 0 (delta 0)
To git@github.com:andrzejsliwa/testapp.git
* [new branch] master -> master